Contact Lance on 0408765922 for all your Edge Bander needs. Darcy Glister Agencies is the Queensland Agent for the KDT Edge Bander range...

KDT-220M Edge Banding Machine

Automatic one-sided edge bander suitable to apply veneer, PVC, ABS, melamine, formica on squared panels. This line of edge banding machines is characterized by an extreme noiselessness as well as by an easy setup and preparation.

A high quality level of panel finishing and conformity with safety regulations complete the machine characteristics.

This edge bander offers a sound cabin to reduce the noise of motorised units. It has been designed to operate efficiently and quietly while producing a premium finish.

All units are easily adjusted and are clearly illustrated to assist the operator. The pressure beam is connected to the top and bottom trim when adjusted for different panel thickness, these units are simultaneously positioned.

The controls are clearly identified and offer simplicity in operation. All safety features are included to ensure longevity of your machine and risk free operation to the user.

Removal of waste from the trimming knives is provided by a positive 80mm dust extraction cover.

Manual change from standard .4 tape to 2mm PVC edge banding tape is by manual adjustment.

The technical data of this model edge bander is now illustrated below, and includes Hot-melt Glue Application to the panel component. Features & Benefits • Three Metal Pressure Rollers adjustable and with digital display, Pneumatic pressured. • Heavy Duty Guillotine, • High frequency Motorised End-trimming saws inverter driven. • End cutting by saws, Inclinable angle from 0 to 15 degree. German linear guides • High frequency Top and Bottom Tiltable Trimmer motors with Radius/Flush Cutters with cutter speed (12000 RPM) • Top Pressure Beam with mechanical digital display and Single Handle Operation, • Heavy Duty Feed Track. • Panel thickness – minimum/maximum 10-60mm • Panel width – minimum 80mm • Panel length – minimum 120mm • Edge strip height – maximum 40mm • Edge tape for coil material .4-2mm • Glue pot capacity 3 lt. • Feed speeds variable 12 Meters per min • Noise level 72db • Motor power required • Machine size 3500 x 1000 x1680mm Weight 1300 Kg, 100 Kg for packaging

KDT-320M Automatic Edge Banding Machine With Scrapers and Buffing Station

Automatic one-sided edge bander suitable to apply veneer, PVC, ABS, melamine, formica on squared panels This line of machines is characterized by an extreme noiselessness as well as by an easy setup and preparation.

A high quality level panel finishing and conformity with safety regulations complete the machine characteristics.

All units are easily adjusted and are clearly illustrated to assist the operator. The pressure beam is connected to the top and bottom trim and scrapers and when adjusted for different panel thickness, these units are simultaneously positioned.

The controls are clearly identified and offer simplicity in operation. All safety features are included to ensure longevity of your machine and risk free operation to the user.

Removal of waste from the trimming knives is provided by the positive 80mm dust extraction cover.

Fast and simple conversion from standard .4 tape to 2mm PVC by means of a mechanical digital reader on pressure rollers, trimming station and scraper station.

The technical data of this model is now illustrated below, and includes Hot-melt Glue Application to the panel component.

Features and Benefits

• Three metal pressure rollers adjustable and with digital display, pneumatic pressured. • Heavy duty guillotine; • High frequency motorised end-trimming saws inverter driven; • End-cutting by saws, inclinable angle from 0 to 15 degrees. German linear guides; • High frequency top and bottom tiltable trimmer motors with radius/flush cutters with cutter speed (12000 RPM) • Scrapers; • Buffing station included; • Top pressure beam with mechanical digital display and single handle operation; • Manual exclusion of the scrapers operated at the control panel • Heavy duty feed track; • Panel thickness – minimum/maximum 10-60mm • Panel width – minimum 80mm • Panel length – minimum 120mm • Edge tape for coil material .4 – 2mm • Glue pot capacity 3 litres • Feed speeds variable 12, mts p/min • Noise level 72db • Machine size 4500x1000x1680mm • Weight 1800kg,




KDT-360 Quick Change Version Automatic Edge Banding Machine

Automatic one-sided edge bander suitable to apply veneer, PVC, ABS, melamine, formica on squared panels This line of machines is characterized by an extreme noiselessness as well as by an easy setup and preparation.

A high quality level panel finishing and conformity with safety regulations complete the machine characteristics.

All units are easily adjusted and are clearly illustrated to assist the operator. The pressure beam is connected to the top and bottom trim and scrapers and when adjusted for different panel thickness, these units are simultaneously positioned.

The controls are clearly identified and offer simplicity in operation. All safety features are included to ensure longevity of your machine and risk free operation to the user.

Removal of waste from the trimming knives is provided by the positive 100mm dust extraction cover.

Fast and simple conversion from standard .4 tape to 2mm PVC by means of a switch selection at the control panel. No manual adjustments are required. The motorized trimming station and the scraper station pneumatically moves into position, as well as the pressure rollers.

The technical data of this model is now illustrated below, and includes Hot-melt Glue Application to the panel component. Features and Benefits

• Four metal pressure rollers adjustable and with digital display, pneumatic pressured. • Heavy duty guillotine; • High frequency motorised end-trimming saws inverter driven; • End-cutting by saws, inclinable angle from 0 to 15 degrees. German linear guides; • High frequency top and bottom tiltable timmer motors with radius/flush cutters with cutter speed (18000 RPM) • Scrapers; • Buffing station included; • Top pressure beam with mechanical digital display and single handle operation; • Heated fence on the infeed, to improve glue bonding in cold winter months; • Pneumatic stop device to prevent premature of the next panel; • Pneumatic exclusion of the top and bottom trimmer assembly, operated at the control panel; • Pneumatic exclusion of the scrapers operated at the control panel • Lubrication to panel surfacer, before the buffers is included on this machine • Heavy duty feed track; • Panel thickness – minimum/maximum 10-60mm • Panel width – minimum 80mm • Panel length – minimum 120mm • Edge strip height – maximum 40mm • Edge tape for coil material .4 – 2mm • Glue pot capacity 3 litres • Feed speeds variable 12, 16, 20 mts p/min • Noise level 72db • Machine size 4680x1000x1680mm • Weight 1880kg, +100kg packaging

KDT-360D Automatic Edge Banding Machine

Automatic one-sided edge bander suitable to apply veneer, PVC, ABS, melamine, formica on squared panels This line of machines is characterized by an extreme noiselessness as well as by an easy setup and preparation.

A high quality level panel finishing and conformity with safety regulations complete the machine characteristics.

All units are easily adjusted and are clearly illustrated to assist the operator. The pressure beam is connected to the top and bottom trim and scrapers and when adjusted for different panel thickness, these units are simultaneously positioned.

The controls are clearly identified and offer simplicity in operation. All safety features are included to ensure longevity of your machine and risk free operation to the user.

Removal of waste from the trimming knives is provided by the positive 100mm dust extraction cover.

Fast and simple conversion from standard .4 tape to 2mm PVC by means of a switch selection at the control panel. No manual adjustments are required. The motorized trimming station and the scraper station pneumatically moves into position, as well as the pressure rollers.

The technical data of this model is now illustrated below, and includes Hot-melt Glue Application to the panel component. Features and Benefits

• Four metal pressure rollers adjustable and with digital display, pneumatic pressured. • Heavy duty guillotine; • High frequency motorised end-trimming saws inverter driven; • End-cutting by saws, inclinable angle from 0 to 15 degrees. German linear guides; • Top & Bottom tiltable motors fixed with straight cutters. 1800 Rpm • Top and bottom tiltable timmer motors with radius/flush cutters with cutter speed (18000 RPM) • Scrapers; • Buffing station included; • Top pressure beam with mechanical digital display and single handle operation; • Heated fence on the infeed, to improve glue bonding in cold winter months; • Pneumatic stop device to prevent premature of the next panel; • Pneumatic exclusion of the top and bottom trimmer assembly on second set only, operated at the control panel; • Pneumatic exclusion of the scrapers operated at the control panel • Heavy duty feed track; • Panel thickness – minimum/maximum 10-60mm • Panel width – minimum 80mm • Panel length – minimum 120mm • Edge strip height – maximum 40mm • Edge tape for coil material .4 – 2mm • Glue pot capacity 3 litres • Feed speeds variable 12, 16, 20 mts p/min • Noise level 72db • Weight 2280kg, +100kg packaging

KDT-420 M Single sided Edge Banding Machine With Corner Rounding

Single one-sided edge bander suitable to apply veneer, PVC, ABS, melamine, formica on squared panels. This line of machines is characterized by an extreme noiselessness as well as by an easy setup and preparation.

A high quality level of panel finishing and conformity with safety regulations complete the machine characteristics.

This machine offers a sound cabin to reduce the noise of motorised units. It has been designed to operate efficiently and quietly while producing a premium finish.

All units are easily adjusted and are clearly illustrated to assist the operator. The pressure beam is connected to the top and bottom trim and scrapers and when adjusted for different panel thickness, these units are simultaneously positioned.

The controls are clearly identified and offer simplicity in operation. All safety features are included to ensure longevity of your machine and risk free operation to the user.

Removal of waste from the trimming knives is provided by a positive 70mm dust extraction cover.

The technical data of this model is now illustrated below, and includes Hot-melt Glue Application to the panel component. Features & Benefits • Metal Pressure Rollers, Pneumatic pressured. • Heavy Duty Guillotine, • High frequency Motorised End-trimming saws inverter driven. • End cutting by saws, Inclinable angle from 0 to 15 degree. German linear guides • High frequency Top and Bottom Tiltable Trimmer motors with Radius/Flush Cutters with cutter speed (18000 RPM) 4 wing cutter block • Scrappers first set , Radius with disposalble tool • Buffing station • Top Pressure Beam with mechanical digital display with manual rise & fall operation, • Heated Fence on the infeed, to improve glue bonding in cold winter months. • Pneumatic stop device to prevent premature infeed of the next panel • Corner Rounding station with High frenquency motors x 2 • Manual setting of all working units. • Heavy Duty Feed Track. • Panel thickness – minimum/maximum 10-60mm • Panel width – minimum 80mm • Panel length – minimum 120mm • Edge strip height – maximum 40mm • Edge tape for coil material .4-2mm • Glue pot capacity 3 lt • End trimming saw motor size .35 kw ( .5 Hp ) • Top & Bottom trimming motor size .7 Kw ( 1 Hp ) • Feed speeds variable 12 meters per minute • Noise level 72db • Machine size 5880 x 1000 x1680mm • Weight 2020 Kg




KDT-450 Automatic Edge Banding Machine With Corner Rounding

Automatic one-sided edge bander suitable to apply veneer, PVC, ABS, melamine, formica on squared panels. This line of machines is characterized by an extreme noiselessness as well as by an easy setup and preparation.

A high quality level of panel finishing and conformity with safety regulations complete the machine characteristics.

This machine offers a sound cabin to reduce the noise of motorised units. It has been designed to operate efficiently and quietly while producing a premium finish.

All units are easily adjusted and are clearly illustrated to assist the operator. The pressure beam is connected to the top and bottom trim and scrapers and when adjusted for different panel thickness, these units are simultaneously positioned.

The controls are clearly identified and offer simplicity in operation. All safety features are included to ensure longevity of your machine and risk free operation to the user.

Removal of waste from the trimming knives is provided by a positive 70mm dust extraction cover.

Fast and simple conversion from standard .4 tape to 2mm PVC by means of a switch selection at the control panel. No manual adjustments required. The motorized trimming station and the scraper station pneumatically moves into position, as well as the pressure rollers.

The technical data of this model is now illustrated below, and includes Hot-melt Glue Application to the panel component. Features & Benefits • Five Metal Pressure Rollers, Pneumatic pressured. • Heavy Duty Guillotine, • High frequency Motorised End-trimming saws inverter driven. • End cutting by saws, Inclinable angle from 0 to 15 degree. German linear guides • High frequency Top and Bottom Tiltable Trimmer motors with Radius/Flush Cutters with cutter speed (18000 RPM) 4 wing cutter block • Scrappers first set , Radius with disposable tool • Buffing station • Top Pressure Beam with mechanical digital display with motorized rise & fall operation, • Heated Fence on the in-feed, to improve glue bonding in cold winter months. • Pneumatic stop device to prevent premature in-feed of the next panel • Pneumatic positioning of the Top & Bottom trimmer assembly , operated at the control panel • Corner Rounding station with High frenquency motors x 2 • Pneumatic exclusion of the scrapers operated at the control panel • Heavy Duty Feed Track. • Panel thickness – minimum/maximum 10-60mm • Panel width – minimum 80mm • Panel length – minimum 120mm • Edge strip height – maximum 40mm • Edge tape for coil material .4-2mm • Glue pot capacity 3 lt • End trimming saw motor size .35 kw ( .5 Hp ) • Top & Bottom trimming motor size .7 Kw ( 1 Hp ) • Feed speeds variable 12, 16, 20 meters per minute • Noise level 72db • Machine size 5880 x 1000 x1680mm • Weight 2020 Kg

KDT-450D Fully Automatic Single-sided Edge Banding Machine With Corner Rounding & Two trimming stations

Automatic one-sided edge bander suitable to apply veneer, PVC, ABS, melamine, formica on squared panels. This line of machines is characterized by an extreme noiselessness as well as by an easy setup and preparation.

A high quality level of panel finishing and conformity with safety regulations complete the machine characteristics.

This machine offers a sound cabin to reduce the noise of motorised units. It has been designed to operate efficiently and quietly while producing a premium finish.

All units are easily adjusted and are clearly illustrated to assist the operator. The pressure beam is connected to the top and bottom trim and scrapers and when adjusted for different panel thickness, these units are simultaneously positioned.

The controls are clearly identified and offer simplicity in operation. All safety features are included to ensure longevity of your machine and risk free operation to the user.

Removal of waste from the trimming knives is provided by a positive 70mm dust extraction cover.

Fast & simple conversion from standard .4 tape to 2mm PVC by means of a switch selection at the control panel. No manual adjustments required. The motorized trimming station and the scraper station pneumatically moves into position, as well as the pressure rollers.

The technical data of this model is now illustrated below, and includes Hot-melt Glue Application to the panel component.

Features & Benefits • Five Metal Pressure Rollers, Pneumatic pressured. • Heavy Duty Guillotine, • High frequency Motorised End-trimming saws inverter driven. • End cutting by saws, Inclinable angle from 0 to 15 degree. German linear guides • 2 Sets High frequency Top and Bottom Tiltable Trimmer motors with Radius/Flush Cutters with cutter speed (18000 RPM) 4 wing cutter block • Scrappers, with disposalble tool • Buffing station included. • Top Pressure Beam with mechanical digital display and Power rise & fall operation, • Heated Fence on the infeed, to improve glue bonding in cold winter months. • Pneumatic stop device to prevent premature infeed of the next panel • Pneumatic positioning of the Top & Bottom trimmer assembly , operated at the control panel • Corner Rounding station with High frenquency motors • Pneumatic exclusion of the scrapers operated at the control panel • Heavy Duty Feed Track. • Panel thickness – minimum/maximum 10-60mm • Panel width – minimum 80mm • Panel length – minimum 120mm • Edge strip height – maximum 40mm • Edge tape for coil material .4-2mm • Glue pot capacity 3 lt • End trimming saw motor size .35 kw ( .5 Hp ) • .Top & Btm trimming motor size .7 Kw ( 1 Hp ) • Feed speeds variable 12, 16, 20 meters per minute • Noise level 72db • Machine size




KDT-450 DJ Fully Automatic Double Sided Edge Banding Machine With Corner Rounding & Pre Milling Stations Two trimming stations

Automatic Double Sided edge bander suitable to apply veneer, PVC, ABS, melamine, formica on squared panels.

A high quality level of panel finishing and conformity with safety regulations complete the machine characteristics.

This machine offers a sound cabin to reduce the noise of motorised units. It has been designed to operate efficiently and quietly while producing a premium finish.

All units are easily adjusted and are clearly illustrated to assist the operator. The pressure beam is connected to the top and bottom trim and scrapers and when adjusted for different panel thickness, these units are simultaneously positioned. Motorized rise and fall

The controls are clearly identified and offer simplicity in operation. All safety features are included to ensure longevity of your machine and risk free operation to the user.

Removal of waste from the trimming knives is provided by a positive 100mm dust extraction cover.

Fast & simple conversion from standard .4 tape to 2mm PVC by means of a switch selection at the control panel. No manual adjustments required. The motorized trimming stations ( Two of ) and the scraper station pneumatically moves into position, as well as the pressure rollers.

The double sided machine has one fixed side, and one motorized side, driven by Linea ball screw and bearings along hardened steel guides. Maximum opening 2600mm panel width.

Positioning of the moving sided is governed by programmable keypad for setting.

The technical data of this model is now illustrated below, and includes Hot-melt Glue Application to the panel component.

Features & Benefits • Pre Milling Station with 140mm Diamond tipped cutter blocks • Five Metal Pressure Rollers, Pneumatic pressured. • Heavy Duty Guillotine, • High frequency Motorised End-trimming saws inverter driven. • End cutting by saws, Inclinable angle from 0 to 15 degree. German linear guides • First Group High frequency Top and Bottom Tiltable Trimmer motors with flushing cutters 18000 rpm 4 wing cutter block • Second Group with same high frenquency top & Bottom motors with radius cutters 2mm. 18000 rpm motor speed, four wing cutter block • Scrapers, with disposable tool • First set of scrapers are flat panel scrapers for the surface • Second set of scrapers are for the radius of PVC Edge tapes • Waste extraction on the scrapers, which removes the peeling into a grid. • Buffing station included, with lubrication. • Pneumatic stop device to prevent premature infeed of the next panel • Pneumatic exclusion of the Top & Bottom trimmer assembly, operated at the control panel • Corner Rounding station with High frenquency motors • Corner rounding station has 4 trimming functions. Eg Both end, Front or Rear ends, or Top only • Pneumatic exclusion of the scrapers operated at the control panel • Pressure beam with motorized movement for rise and fall, mechanical digital display for positioning thickness. • Heavy Duty Feed Track. • Panel thickness – minimum/maximum 10-70mm • Panel width – minimum double side ( Eg Drawer fronts ) 120mm • Panel length – minimum with center support D/S 410mm • Panel length – minimum without center support D/S 260mm • Panel length –maximum 2600mm • Panel width- minimum single side ( Eg Rails ) 80mm • Edge tape for coil material .4-3mm • Glue pot capacity 3 lt. • Feed speeds variable 12, 16, 20 meters p/min • Noise level 72db • Motor power required • Machine size length 6900 • Machine weight